Good to know
- About 158 hp and 111 Nm in the 2016 launch model
Specifications
| Engine type | liquid-cooled DOHC inline four |
|---|---|
| Gearbox | 6-speed |
| Final drive | chain |
For repairs: Inline-four, chain drive, 6-speed wet multi-plate slip/assist clutch.
Top repairs for the Yamaha MT-10
The jobs that keep a street bike like this safe and running, from rider checks to workshop jobs. These are routine maintenance and common checks for this type of bike, not a ranking of faults.
- Pre-ride checkRider job · 2 min daily; 10 to 15 min weekly
- Check tyre pressureRider job · 5 min
- Inspect tyres for wear and damageRider job · 10 min
- Check wheel bearingsHome workshop · 15 to 30 min
- Change the engine oil and clean the strainerHome workshop · 40 to 60 min
- Clean or replace the air filterRider job · 15 to 40 min (estimate, plus drying time for foam)
- Remove, check, gap and fit a spark plugRider job · 15 to 20 min
- Inspect and replace clutch plates and springsWorkshop job · 1.5 to 3 h (assessment and plate change, engine in frame)
Check your version first. Confirm generation, ABS, fuel system, clutch actuation and final-drive type. Use the values in your bike's manual.